If you’re looking for a quick and easy way to add some new life to your home décor, then look no further than seat cushions! Covering your old, boring seat cushions with fresh, new fabric is an inexpensive way to brighten up any room. Plus, it’s a great way to use up leftover fabric from other projects.
In this tutorial, we’ll show you how to make piped seat cushion covers. Piping adds a touch of elegance to any project, and it’s not as difficult as you might think. With just a few simple steps, you’ll be on your way to updating your home in no time!
In this tutorial, we will show you how to make your own piped seat cushion covers. These are a great way to add a touch of style and comfort to your home, and they’re easy to make!
What you’ll need:
- Old seat cushions
- New fabric
- Scissors
- Piping (you can purchase this at most fabric stores)
- Thread
- Sewing machine
Instructions:
- Start by measuring your seat cushions. You’ll need to know the length, width, and depth (thickness) of each cushion. Measure around the entire perimeter of the cushion, and be sure to include the depth in your measurements.
- Cut your new fabric to size, allowing for a ½” seam allowance on all sides.
- If you’re using patterned fabric, now is the time to decide which way you want the pattern to face. Once you’ve decided, lay out your fabric wrong-side up and place the seat cushion in the center.
- Fold one side of the fabric over the top of the seat cushion and pin in place. Repeat with the other three sides, making sure that the raw edges of the fabric are all aligned.
- Sew around the perimeter of the seat cushion, using a ½” seam allowance. Be sure to backstitch at the beginning and end of your stitching to secure the seams.
- Cut your piping to size, allowing for a ¼” seam allowance on all sides. To do this, simply measure around the entire perimeter of the seat cushion (including the depth) and add 1″.
- Pin the piping in place, aligning the raw edges with those of the fabric. Start by sewing the piping to one side of the seat cushion, and then continue around all four sides.
- Once you’ve sewn the piping in place, fold the fabric over to the wrong side and pin in place. Sew around the perimeter of the seat cushion, using a ½” seam allowance. Be sure to backstitch at the beginning and end of your stitching to secure the seams.
- That’s it! Your new piped seat cushion covers are now ready to use. Enjoy!
FAQs:
Q: Do I need to use a special kind of fabric for this project?
A: No, you can use any type of fabric that you like. However, we recommend using something that is at least partially synthetic (like cotton duck) so that it is easier to work with.
Q: Can I make these cushion covers without using piping cord?
A: Yes, you can. Just omit the cord and sew the fabric pieces together as directed in the tutorial.
Q: I don’t have any seat cushions that need covers. Can I still use these?
A: Absolutely! These cushion covers can also be used as throw pillows. Just stuff them with some polyester fiberfill and you’re good to go.
Q: Can I make these cushion covers in a different size?
A: Yes, you can. Just cut the fabric pieces to the desired size and sew them together as directed in the tutorial.
Q: Can I make these cushion covers without using elastic?
A: Yes, you can. Just omit the elastic and sew the fabric pieces together as directed in the tutorial. You may want to add some Velcro or ties so that they stay in place, though.
Conclusion:
In this tutorial, we showed you how to make piped seat cushion covers. These are a great way to add a touch of style and comfort to your home, and they’re easy to make! Just follow the steps in the tutorial and you’ll be on your way to updating your home in no time!